Innovation Living - Care guide

Please note!

This care guide is developed by professional furniture specialists. Please be aware that the following guideline is a recommended care guide for maintenance and should be followed on own responsibility.

  • Avoid placing the furniture directly in sunlight as this cause materials to fade or crack. Direct sunlight includes sunlight coming through windows
  • Do not place the furniture too close to a heater appliance as this may distort the material or surface finish
  • Do not place the furniture directly against a wall
  • Colored textiles may rub off
  • If possible, rotate cushions regularly to even wear and fading
  • Make sure to keep ordinary air humidity where your furniture is placed through regularly ventilation
  • Innovation Living’s furniture are not intended for outdoor use. Wet or moist environment will cause corrosion
  • Keep the textile clean for dust and dirt by regularly vacuum cleaning.
  • If the furniture gets spots by beverages, food, etc. dry the spots immediately with a clean cloth. If it does not remove the spot completely, kindly apply mild detergent foam with a soft brush and sponge in circular motions. The clean spot can be dried with a hair dryer using low heat only. Vacuum the spot when the clean spot is dry. Remember to firstly pre-test on a small unexposed area.
  • For more difficult stains as blood, oil, ink, etc., please contact a professional dry cleaner.
  • Keep the textile clean for dust and dirt by regularly careful vacuum cleaning, or by using a soft brush. Remove light spots with lukewarm water followed by immediately using a dry cloth.
  • Use only water-based cleaning agents since cleaning agents contain chemicals that may discolors or cracks in the surface.

Like other natural materials leather will over time fade being exposed to sunlight and high heat. Therefore, furniture should not be exposed to direct sunlight or direct heat from heat appliances. Generally, natural leather lasts longer if it is cleaned and maintained regularly. Use cleaning agents intended for leather furniture only.

Several Innovation Living furniture have wooden legs and/or arms. As wood is a natural living material that continues to work overtime, its color and surface change according to the use of the furniture. Wood must be protected from direct sunlight to reduce fade.

  • Dust regularly with a soft cloth.
  • Never use scouring agents on metallic surfaces.
  • Repair damaged surfaces immediately to prevent corrosion.
  • Chrome and stainless steel can be treated and cleaned with a suitable cleaning agent – please consult an export for advice.

Innovation Living’s mattresses are continuously developed to achieve an improved comfort, but by increasingly developing the mattresses quality and environmental appeal. Innovation Living’s mattress range includes several options with various comforts, each a unique combination of layers and materials in order to fulfill most needs and use-situations.

Along with the introduction of ‘Collection 2019’ are Classic-, Latex- and Spring mattresses in our Multifunctional product category changed from containing traditional cotton layers to fiberfill.

Please, be thereby aware of when the mattress is bought. Mattresses bought before 2019 will typically contain cotton layers, whereas mattresses bought after January 2019 will contain fiberfill.

Fiberfill in Innovation Living mattresses are developed to improve a better comfort, longer durability and a more environmental-friendly mattress. Fiberfill is a strong material ensuring similar mattress form and an effective transportation of humidity. Simultaneously, fiberfill is more resistant towards i.e. humidity, blemish and eventual ignition.

The composition of the mattresses and its flexible materials improve the mattresses lifetime and make them ideal for use in sofa beds and beds with elevation. Fiberfill is moreover a low CO2-emisson material that at the same time is recyclable and Oeko-Tex certified. This means less resource consumption and ensures a lighter mattress.

Make sure to lightly beat the mattress regularly. This will maintain the mattress in shape and further keep its comfort. Along with this, always keep a decent indoor climate by regularly ventilate the room where the furniture is placed as high humidity will reduce the mattress’s durability and comfort. Please, contact your local Innovation Living dealer for further information about maintenance.

Innovation Living mattresses have until ultimo 2018 contained cotton layers. If you have bought your mattress after 2018, please read above this section concerning ‘Fiberfill’.

Cotton is a naturally breathable material that helps adjusting the body temperature which is vital for proper sleeping. The composition of the mattresses, unique build and flexible materials makes them ideal to use in sofa beds and beds with elevation. Innovation Living mattresses that contain cotton layers, it is recommended to regularly lightly beat the mattress in order to even out the fillings and air the cotton layers. This will help the mattress to be in shape and further maintain its comfort.

Mattresses with cotton layers can possibly cast off a characteristic cotton odor. Daily ventilation will cause it to disappear with approximately 14 days.

Make sure to always keep a decent indoor climate by regularly ventilate the room where the furniture is placed as high humidity will reduce the mattress’s durability and comfort. Please, contact your local Innovation Living dealer for further information about maintenance.

Our cushions are consisting of a mix of feather- and polyester fillings. These are combined to ensure the best back support and comfort. Make sure to regularly turn and lightly beat the cushions in order to maintain shape, filling and comfort.

All cushion covers can be removed and cleaned. Please contact a professional dry cleaner.

To facilitate the transportation, we have vacuum-packed our cushions. This makes the filling look less plump. To get the cushions in shape, please remove the plastic and fluff up the cushion until the filling is plump and stretchy. If needed and possible, repeat this a couple of times over the next few days. Regulate the corners of the cushion so that the filling is evenly spread; lastly you put the cushion into the cover. Remember to fluff up the cushion regularly to maintain its shape. Keep the room ventilated to avoid humidity and thereby extend the durability of the cushions.


Contact Customer Service

  • phone+45 8643 8211
  • Monday - Thursday 8 AM - 4 PM
    Friday 8 AM - 3 PM


Innovation Living A/S
Blommevej 38
8930 Randers

Get in touch with Innovation Living costumer service